30 April 2009

San Bruno Done Right

As previously noted in Focus on: San Bruno, Caltrain has already spent $10 million on plans to rebuild the San Bruno station with new grade separations for downtown streets. These detailed plans (refer to plan views and cross-sections) were completed several years ago, and are now dormant for lack of construction funding. The recent economic downturn is creating renewed interest in the San Bruno project, because it is technically "shovel ready" with environmental clearances, community buy-in, and preliminary design work completed. The California High Speed Rail Authority, in its drive to carve out a slice of the $8 billion of high speed rail stimulus funding, has identified the San Bruno project as one of the few "shovel ready" items it can fund before the expiration of stimulus funding in 2012. The project, estimated to cost $300 million, is likely to appear on the list to be discussed at its May board meeting. San Bruno may not know it yet, but it is definitely on the fast track.

Quick Links (discussed extensively below)
  • San Bruno Done Right dimensioned plan view PDF (224kb)
  • San Bruno Done Right 3D model (1.1mb) for Google Earth
Not So Fast

Caltrain's design for the San Bruno station was conceived for commuter rail operations, with two extra tracks added ostensibly for HSR but equally useful for Baby Bullet express service. Whatever they may claim, Caltrain's old design is not compatible with high speed rail and threatens to lock in two disastrous design decisions before the conceptual engineering for HSR is complete.

First, the exceedingly sharp 60 mph curve at San Bruno would delay each HSR service by about 40 seconds; this curve was previously singled out as the worst curve for HSR on the peninsula corridor. This curve is so sharp that it needs flange greasers (shown at left) to squirt lubricant on train wheels, to mitigate wear and noise. Nevertheless, Caltrain officials have expressed ambivalence about straightening San Bruno curve, believing that the few seconds it would save are insignificant. A few seconds here, a few seconds there, and pretty soon it ain't high speed rail anymore... But why should they care, indeed? Straightening the curve for 100+ mph provides zero operational benefit to Caltrain. Any why would the CHSRA care, as they are tripping all over themselves to get something--anything--funded, and shovels turning dirt? Unfortunately, jerking a high speed train through a sharp 60 mph curve is very energy intensive and environmentally wasteful, and fundamentally at odds with modern train control software which seeks to minimize energy consumption. Assuming a realistic, environmentally appropriate, energy conservative speed profile, the San Bruno curve threatens to cost HSR far more than the 40 seconds lost in a lead-foot acceleration scenario.

Second, Caltrain's new station design at San Bruno puts the platforms on the outside, with the express tracks in the center. As was discussed in Slow Traffic Keep Left, this is probably not the best arrangement for a corridor shared with HSR, mainly because Caltrain service disruptions can propagate to HSR and disrupt service state-wide. Where to put the express tracks, and thus where to place Caltrain station platforms, is one of the most fundamental design decisions to be made on the peninsula, and it should be decided by a rigorous trade study. Such a momentous, corridor-wide decision should not default to five-year-old plans drawn up outside the high speed rail project.

San Bruno Done Right

Since a picture is worth a thousand words, a 3D model may be worth a thousand pictures. Here is the future San Bruno station and grade separation done right: with the curve straightened out for 100 mph operation, and a central island platform for Caltrain.

Download Google Earth model, enable the Terrain checkbox, and click on Tour. Make sure to fully explore the details of the station area, including stairways and platform canopy. (The necessary viewer, Google Earth, is free and easy to install.) At the new San Bruno,
  • All pedestrian access paths lead to the correct platform.

  • High speed trains, running on the outside tracks furthest away from the platform, save at least 40 seconds by avoiding the need to slow down for the sharp curve. That doesn't sound like much, but it's nearly half a percent of the entire express run from San Francisco to Los Angeles. Savings like this are too good to pass up.

  • A continuous viaduct can be built across both San Bruno and San Mateo avenues, resulting in easy pedestrian access from anywhere in the vicinity of the station.

  • The changes affect only the station area and adjacent curve. The remaining grade separations are identical to those proposed by Caltrain.
To be fair, this San Bruno design does have a few drawbacks. Straightening the curve requires taking a few residential properties on Montgomery Ave. by eminent domain--politically not very savory, considering this will likely be one of the first HSR construction sites on the peninsula. Nevertheless, such takings are kept to an absolute minimum by careful design of the curve, and amount to a tiny fraction of the project's $300 million price tag. The area allocated to station parking is also reduced somewhat, although an equivalent amount of parking could be recovered on the west side of the tracks.

For the track geometry junkies out there:
  • The vertical track profile is similar to Caltrain's (see Appendix B page 4).

  • The new horizontal alignment (see dimensioned plan view PDF) features a 1200 m (3900 ft) radius curve, good for 109 mph at 12 inch total equivalent cant or 100 mph at 10 inches.

  • The 210 m (700 ft) long by 9 m (30 ft) wide platform is very slightly tapered to minimize the area consumed by track slews at each end of the platform; the radius of the southbound platform face is 6000 m (20,000 ft) and produces a less than 1 cm (3/8 inch) ADA-friendly platform gap, with a benign, ADA-friendly 25 mm (1 inch) superelevation, as demonstrated by the Bombardier cars placed in the 3D model.

  • It is likely that all four tracks can fit under the I-380 viaduct without moving any support columns. Even if this were not feasible, and supposing that it became necessary to relocate one row of six columns, the CHSRA has already demonstrated a willingness to move freeway supports in their design for the north end of Tunnel #2 under I-280 in San Francisco. If it makes sense there, it makes far more sense in San Bruno.

  • In recognition of the tight clearances under I-380, accurate Bloss spiral transition curves are shown. The tracks and station foundations do not interfere with existing BART tunnel, and the curve is configured so as to fit between the I-380 support columns while minimizing excursions from the existing right of way boundaries. These improvements are likely feasible without major re-engineering of adjacent civil structures.
On the whole, this proposed configuration would be a highly effective update of Caltrain's plans for San Bruno, making them fully compatible with High Speed Rail. Can we hope San Bruno will be done right?

Many thanks to Richard Mlynarik for his 3D modeling skills and advice on track geometry.

21 comments:

  1. Wow! Those renderings are amazing. Hopefully someone from CHSRA is listening.

    ReplyDelete
  2. Yes, I'll second that. Great job, I hope someone in-the-know is reading this blog.

    San Fran's Transbay center, and now this. I can't believe that I am going to say this after god knows how many years of dreaming and planning, but this whole thing is beginning to feel rushed!

    Sigh. Look at China, see how they can seemingly build stuff overnight. Look at our history, how we could build great infrastructure in the 30s. Now look at us fumbling around, struggling to get this project done right. How can one not get depressed?

    ReplyDelete
  3. Kudos to Richard Mlynarik and Clem for this post. A 3D model is indeed worth 1000 pictures.

    What surprised me is few eminent domain takings would be necessary to ease the curve. That's probably cold comfort to those affected, but with a sufficiently generous settlement, those homeowners could probably afford to purchase properties at some distance from the tracks.

    The model also brings into sharper relief the need to hammer out the track assignment issue. The FSSF configuration advocated before and illustrated here is better for operations.

    However, it also means the HSR trains traveling at 100mph+ will emit noise closer to residential buildings. In addition, central island platforms may require greater eminent domain takings all the way down the line due to the long chicanes needed to shift HSR trains laterally.

    ---

    Note that CHSRA is currently assuming SFFS south of Bayshore and FSSF north of it, with a trench to facilitate the transition. The apparent reason is that Caltrain wants to keep using the existing tunnels during and after construction, in part because of pressure to implement a gauntlet track for AAR plate H freight.

    Both SFFS and FSSF could turn out to be problematic for HSR operations whenever UPRR decides it needs to cross tracks to reach a freight spur. Granted, that doesn't happen often, but per constract between SP and PCJPB, Caltrain must grant UPRR a certain number of 30-minute windows to do its yard switching. UPRR has asked for full grade separation between HSR tracks and its own turnoffs to freight spurs.

    ---

    In addition, there may or not be a (minor) track crossing problem regarding the Dumbarton wye, assuming the Dumbarton rail project is not canceled. Santa Clara county, preoccupied with the BART extension, wants to get out from under its commitment due to cost escalations, falling ridership estimates and the absence of trackage rights from UPRR in the East Bay.

    My understanding is that the BART extension to SFO required MTC to divert $145 million it had planned to spend on the extension to Fremont Warm Springs. Last summer, SMCTA agreed to repay the favor by allowing MTC to divert $91 million it had earmarked for the Dumbarton rail project to the WSX project. That currently lists $54 million in "SFO Extension Surplus Revenue" still outstanding.

    If the old bridge is restored after all, it's possible that over time, traffic may increase beyond a few Caltrains per day to include e.g. UPRR's Mission Bay Haulers, a new ACE service etc. Whatever decision is taken on the track assignments will likely remain in force for decades to come, so a decision on the fate of Dumbarton rail should be taken soon.

    ReplyDelete
  4. @Rafael

    central island platforms may require greater eminent domain takings all the way down the line due to the long chicanes needed to shift HSR trains laterally .

    The gentle (less than 5 m) track slews can be done within less than 400 m of run length, as shown by the plan view. They do take a little bit of extra right of way, but it's not automatically true this would result in additional eminent domain takings. That's the sort of statement that fear-mongering opponents might make.

    ReplyDelete
  5. So many words.

    So little information.

    The slews! The horrible, horrible slews! They're going to murder us in our beds! Hide the children!

    ReplyDelete
  6. On the plan view, that salmon-color band just south of the north spiral is I-380? The 1200-meter radius is intended to fit around the existing overpass columns? Do we know their location well enough to be sure it will?

    10 inches cant needed to balance at 100 mph, 4 inches actual cant-- is CAHSR going to be allowed 6 inches cant deficiency?

    ReplyDelete
  7. On the plan view, that salmon-color band just south of the north spiral is I-380?Yes. Sorry. I should have had the public outreach team of graphic design communications professionals do the final version.

    The 1200-meter radius is intended to fit around the existing overpass columns? Do we know their location well enough to be sure it will?No. It's suggestive.

    There are people who are paid hundreds of thousands (each) and tens of millions (cumulatively) per year to do this stuff and have the tools to do it at millimetric precision. Above my pay grade!

    Of course having the tools and having a clue aren't the same thing.

    10 inches cant needed to balance at 100 mph, 4 inches actual cant-- is CAHSR going to be allowed 6 inches cant deficiency?The balancing elevation for a curve of radius 59 235/360 rods traversed at 81 knots is 42.4 picas. German law (one ought to pick something from an advanced industrialized first world democracy, and these standards are the ones most familiar and accessible to me: RiL 800.010) allows 150mm of cant deficiency and for such curves on plain track. Allowable cant is 160mm on ballast, 170 with direct fixation track. Maximum cant for platform tracks is 100mm, with a suggested design limit of 60mm.

    So this isn't remotely extremal (or even XTREME) engineering.

    PS Note there's nothing that requires the slow (inner) tracks to have exactly the same design speed or superelevation as the flanking fast tracks.

    Signalling systems (well, perhaps not the PRR pulse-coded all-American wonder-system that was good enough for my granddad so it's good enough for you) can deal with enforcing different civil speed limits on different tracks at different locations.

    PPS As Clem pointed out in his post, the 81 knots number didn't come out of thin air: it is an attempt to roughly match the harder limit a little to the north at Sierra Point, with the idea that good real-world engineering (not something obvious here in CHSRA's alternate-universe run-time simulation) suggests that raising the slowest speeds and enabling consistent if only moderately higher average speeds gives the best return on capital, as well as long-term benefits for train operation and energy consumption.

    Assuming you're interested in return on investment, of course.

    ReplyDelete
  8. 10 inches total cant should be eminently doable, even under US standards. The FRA can allow up to 6 inches cant deficiency in some circumstances with a waiver, notably on "high speed" lines. And hey, ACSES can enforce civil speed limits just fine. Would it make anyone happier to learn that it's actually a french technology made by a french company and largely a copy of a system used by SNCF? Except unlike SNCF, the US doesn't use "crocodiles".

    ReplyDelete
  9. Adirondacker01 May, 2009 15:01

    those homeowners could probably afford to purchase properties at some distance from the tracksSome people think being near the tracks is a good thing. Makes it easier to get to the station. Where the um um trains are....

    ReplyDelete
  10. @arcady: KVB and crocodiles are different systems. ACSES beacons are more similar to a ETCS Eurobalise ;-)

    ReplyDelete
  11. An additional feature of the San Bruno station that would make it VERY useful -- a BART station.

    I never understood why they didn't build one there in the first place. The Millbrae transfer point is nice, but twice as many trains go through San Bruno, and it's directly under the Caltrain/CHSR tracks. This is a perfect place for a transfer station (even if it's only to Caltrain and not HSR).

    I think retrofitting side platforms with stairs leading up to the Caltrain station area (where you can place the ticket machines and turnstiles) would be a great additon that would simplify many Caltrain<->BART transfer difficulties that Millbrae has.

    ReplyDelete
  12. If I were you I would stop worring about San Bruno and worry more on Palo Alto...2 Billion to tunnel thru there due to 3 loud mouths nimbys that YOU welcome to your board FAR outway the cost of rebuilding this curve

    ReplyDelete
  13. Yeson - 3 nimbys -that's funny! (Esp because at least 30 of them showed up in Sacramento last week..) And 30 is a pretty heck of an amazing turnout - because in my experience on other non-HSR related grass roots efforts, is that 'nimby's' are like icebergs - the ones that poke through the surface are just the bravest - or stupidist - to be vocal, and willing to put their names/faces on the line. Most, especially in money towns, keep their politics private - because it doesn't pay to get a bad rep. They'll keep their support to a few private well placed phone calls, a fe private coffee meetings with those who matter, a few quietly written donations, public meetings or letter writing (only where they can remain anonymous), and of course, voting. What they especially don't want to do is APPEAR to be taking a stand that might piss off some clients, or their kids teacher, or the guy who coaches their kids team, etc. You'll never get a good count of the NIMBY's by counting up the number of names on a petition, or the number of people that show up at a city council meeting...

    (I'll call them nimbys - cuz thats the only term you seem to understand, but some might call them locals, concerned residents, community activists, motivated residents, neighors, etc)

    ReplyDelete
  14. Re main article: But why should they [Caltrain] care, indeed? Straightening the curve for 100+ mph provides zero operational benefit to Caltrain.Yes, but ...

    Caltrain would benefit significantly from upping the worst (well, worst north of the entirely self-inflicted CEMOF wound) curve on the line to above 60 (today) or circa 70 (their super-ambitious future) mph.

    Caltrain would benefit immensely by setting a pattern of central island platforms with flanking express tracks along the peninsula -- after all, that is by far the most passenger-friendly design, and most passengers on the corridor with be local and regional (ie Caltrain) passengers.

    So why isn't Caltrain doing it?

    Stupidity? Timidity? Obliviousness? Internal sabotage? External sabotage?

    Who can say? I wish I knew. All anybody I know can say is that the agency, despite the very high hopes many of us had after significant staff changes, and despite appearing quite aware of the existence of and not overtly hostile to the right solutions, still consistently and reliably does the wrong thing, for whatever reason, almost without fail.

    It's a profound mystery, and it's quite heart-breaking.

    Pacheco. Silicon Valley High Speed Rail Coalition. CEMOF. Transbay. FRA. Mixed Traffic. CBOSS. 8" platforms. Oh man, the pain, the pain.


    (My guess is "external-internal sabotage", in the form of known, proven, reliably evil scumbags at SFCTA, SCVTA, C&CSF, SJ and MTC kneecapping any and all Caltrain projects politically, but one should never underestimate the forces of home-grown stupidity and ignorance, especially where Professional US Railroad Engineers and Consultants are involved.)

    ReplyDelete
  15. @Richard, Caltrain's thoughts on center island platforms are fairly clearly expressed in their Project 2025 plan. They prefer them, except that they require more ROW and as soon as you try to build outside the established ROW boundaries they have to comply with CEQA.

    That may be a big obstacle for Caltrain, but since HSR has to do a full EIR/EIS, there is very little additional effort involved on the part of the CHSRA to enable a fast-slow-slow-fast configuration. Some more engineering, yes, but not a whole new approval process.

    ReplyDelete
  16. Whooow hooo 30 show up!!! AND what
    half of them PAID city officers and the rest of bunch of people that dont have to work anymore for whatever reason...What about the THOUSANDS that voted YES? NO loud
    yelling mouths are given way to much power.

    ReplyDelete
  17. Would you keep it on topic please. I'm about to wield the delete button.

    ReplyDelete
  18. The question in my mind is, what can we do in a short period of time to push Caltrain and the CHSRA toward putting up this design?

    Its better for all Caltrain passengers. Its substantially better for less mobile Caltrain passengers, who do not have to switch platforms if Caltrain services are forced to switch tracks. Its better for freight operators. Its less risk of slow traffic crossing the HSR lines for HSR operations.

    How is that stitched together into a political coalition to force the decision?

    ReplyDelete
  19. Alex said... "San Fran's Transbay center, and now this. I can't believe that I am going to say this after god knows how many years of dreaming and planning, but this whole thing is beginning to feel rushed!"

    Understand that both the TBT and this are onlyt "rushed" because of the Stimulus funding on the table. Without the stimulus funding, the TBT Stage 1 would be going ahead without the train box, and that would be a fight to fight over the next five years, with demands for peer reviews and such.

    And bear in mind that nobody could have forseen the timing of the financial collapse, and only a few foresaw its severity.

    And Stimulus funding is rushed ... the whole point is to get the money spent sooner rather than later.

    ReplyDelete
  20. The fact that private property may have to be acquired for any public project does not necessarily mean the use of eminent domain. The government has an obligation to make good faith fair market value offers to property owners who can then agree to voluntarily sell their land. Residential owners would also be entitled to relocation benefits on top of the purchase price.

    Only if private property owners refuse to sell at a reasonable price is resort to eminent domain (also known as condemnation) necessary. Right of way agents can be ham fisted, and their bosses try to get land on the cheap -- but if done right, public land acquisition can be win-win.

    ReplyDelete
  21. San Bruno is to be done absolutely wrongly -- in every possible way -- and grotesquely professionally incompetently, for ABSOLUTELY NO REASON, by our wonderful allies at Caltrain and the Peninsula Rail Program.

    Your tax dollars at work.

    America's finest transportation planners and engineers at work.

    The only hope for Caltrain is that everything associated with it is defunded and that the agency folds. Not building crap is far cheaper than being massively defrauded first to build crap that is known outright to br wrong and then paying over and over again to knock it down and do it over.

    Brought to you by the same agency that brought you the Millbrae Intermodal Station.

    Brought to you by the agency that actively endorsed BART to Millbrae and HSR via Los Banos!

    Brought to you by the agency that will be designing, implementing, testing and operating CBOSS!

    Brought to you by the Context Sensitive Pensinsula Rail Program.

    Happy New Year!


    Items 11 and 12 Caltrain January 2010 agenda

    AUTHORIZATION TO AMEND AND INCREASE THE FISCAL YEAR 2010 CALTRAIN CAPITAL BUDGET

    Staff Coordinating Council (SCC) recommends the Board increase the Fiscal Year 2010 Capital Budget by $73 million for the San Bruno Grade Separation project and $625,000 for the San Mateo Grade Crossing Safety Improvement program. As a result of these two changes, the total authorized amount for the FY2010 Caltrain Capital Budget would increase from $85,236,042 to $158,861,042.

    ...

    AUTHORIZING THE FILING OF AN APPLICATION TO REQUEST 2010 REGIONAL IMPROVEMENT PROGRAM FUNDS IN THE AMOUNT OF $19,203,000 FOR THE SAN BRUNO GRADE SEPARATION PROJECT

    ACTION

    Staff Coordinating Council (SCC) recommends that the Board adopt a resolution authorizing the Executive Director, or his designee, to:

    1. Submit an application to the Metropolitan Transportation Commission (MTC) for Fiscal Year 2011 Regional Improvement Program (RIP) funds, in an amount of $19,203,000, for the San Bruno Grade Separation Project; and

    2. Execute a Certification of Assurances and such other documents as may be necessary to
    implement the aforementioned Action.

    ReplyDelete